Transmission parts
-
Thrust Needle Roller Bearings
·Bearing used inside the transmission; long life even under high-speed operation is needed.
·A small torque is realized through reduction of friction resistance at high-speed operation between components of the bearing.
- bob体育官方:Detail >>
-
Electric pump for idle-stop system
·It operates only in engine stop to reserve the hydraulic pressure necessary to start smoothly from the idling state.
·A compact size and light weight are realized through optimized design of components and reduction of the number of parts.
- Detail >>
-
Oil pump for CVT
Providing hydraulic power pressure to the clutch of automatic transmission or the sheave of continuously variable transmission.
High tooth profile makes the equipment of high efficiency pinion gear possible, contributing to the reduction of fuel consumption.
- bob体育官方:Detail >>
-
Needle roller bearings for planetary gear
·This bearing is used in the automatic transmission mechanism and planetary gear mechanism used in the advance/retraction switching mechanism of the CVT.
·While a large centrifugal force is generated in the planetary gear during high-speed operation, an extended service life and a small torque are realized through adoption of the special heat treatment shaft and cage and rollers of a strong retainer.
- bob体育官方:Detail >>
-
Solenoid valves
·Control of line pressure inside automatic transmissions (ATs)and continuously variable transmissions (CVTs), enablingsmooth and shock-free gear shift control.
·A compact/highlyefficient structure has been adopted, contributing to enhanced.
- bob体育官方:Detail >>
-
Oil seals for transmission
Various oil seals keep the bearings in the transmission working stably and smoothly.
- bob体育官方:Detail >>
-
Bearing for transmission
- bob体育官方:Detail >>
Low friction-torque 3rd-generation (LFT-III) tapered roller bearing
The torque loss is substantially reduced through reduction of the lubricant agitation resistance and optimization of the bearing characteristics.
